Wire and cable enameled wire melt gear pump

Introduction to Wire Extruder Melt Pump

Wire extruder melt pump, also known as extruder metering pump or extrusion pump, can be used in various extrusion industries, such as sheet, sheet, pipe, film, granulation, wire drawing, cable, co extrusion, mixing, precision extrusion, and other industries.

The cable melt gear pump is a universal extrusion system melt gear pump. Suitable for extrusion and transportation of polymer melts from low viscosity to extremely high viscosity; Generally installed between the outlet of the extruder and the die head, used as a melt metering pump; It can also be installed in the polymer melt pipeline as a Booster pump.

The materials that can be transported by the melt gear pump mainly include:

Thermoplastic materials and their blends

PET PBT PTT

PA6 PA66

PA12

PE LDPE LLDPE HDPE HMWPE

PP EVA PB

PB PS HIPS ABS SAN

PC PEK PMMA POM

TPU PLA PBS

Rubber and Elastomer Materials

NR BR CR NBR

IR IR

SBR HNBR

EPM EPDM

PU TPU

ACM CSM

ECO SI

Technical data:

Transmission medium viscosity: 1E-3~40000 Paos

Suction pressure: 0~30MPa

Output pressure: 0~40MPa

Allowable pressure difference: 25MPa

Operating temperature: ≤ 350 ° C

Heating method: electric heating

It is recommended to use a universal coupling to connect the reducer and melt pump to eliminate the influence of thermal deformation; The melt gear pump is a positive displacement forced delivery pump that can adjust the pump output flow rate by adjusting the pump speed. It is recommended to use By using variable frequency speed regulation, the nearly linear flow output of the gear pump can be achieved.

Email: info@battemachinery.com

Whatsapp: +86 158 38331071

Any questions about our products, please feel free to contact us! We promise you high-end products and first-class service.Look forward to our cooperation!!!